Blazer Radio Install
Friday, June 5th, 2009
Installing a 1/2 face modern style radio in a pre 90’s blazer.
Installing a 1/2 face modern style radio in a pre 90’s blazer.
Posts Tagged ‘mounting’
Blazer Radio Install
Friday, June 5th, 2009
GM 14 bolt swap into a 1/2 ton chassis
Wednesday, April 8th, 2009
This is a common swap done by many in the 4×4 world to beef up there 1/2 ton or c-clip axles. Other than the larger and beefier ring and pinion the major benefit of this swap is the full floating axles. The difference is that when a c-clip axle breaks the axle will slide out […]
This is a common swap done by many in the 4×4 world to beef up there 1/2 ton or c-clip axles. Other than the larger and beefier ring and pinion the major benefit of this swap is the full floating axles. The difference is that when a c-clip axle breaks the axle will slide out […]
BMX To Motorcycle Conversion
Tuesday, June 26th, 2007
Here are plans to build a small motorcycle from any old BMX bike and get close to 100 miles per gallon in the process. The tools that I used were a welder, die-grinder, crescent wrench, and other smaller hand tools that are common around most people’s homes. My finished product had a gear ratio of […]
Here are plans to build a small motorcycle from any old BMX bike and get close to 100 miles per gallon in the process. The tools that I used were a welder, die-grinder, crescent wrench, and other smaller hand tools that are common around most people’s homes. My finished product had a gear ratio of […]
